Please ensure that all persons operating the equipment have read and understood this user manual. Keep this user manual on hand for ready reference. Company address: Wassermann Dental-Maschinen GmbH Rudorffweg 15-17 D-21031 Hamburg Germany Tel.: +49 (0)40/ 730 926 - 0 Fax.: +49 (0)40/ 730 37 24 e-mail: info@wassermann-dental.com...
- 2 - Contents Contents ............................2 For your safety ........................3 ...................3 ORRECT USE OF THIS PRODUCT .................3 AFETY SYMBOLS USED IN THIS MANUAL ......................3 AFETY GUIDELINES ......................4 ANDPIECE BLOCK ...............4 ESPONSIBILITY FOR OPERATION AND DAMAGE ......................5 UTHORIZED USERS Care and maintenance ......................5 ......................5 AINTENANCE ...........................6...
- 3 - 1 For your safety 1.1 Correct use of this product This laboratory equipment is designed for working with dental materials (stainless steels, plastics, ceramics, etc.) in dental laboratories using rotating tools. 1.2 Safety symbols used in this manual Warning! This is a warning of risk situations and dangers.
The unit must be maintained and operated in accordance with this user manual. Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the non-observance of these instructions.
- 5 - 1.6 Authorized users The owner of the equipment must ensure that any users have been provided with the user manual and that they have read and understood its contents before operating the equipment. Ensure that this user manual is accessible at all times and has been read and understood.
- 6 - 2.2 Care Remove external dirt from time to time with some form of cold cleaner. Use only cold cleaners to avoid damaging the paintwork or removing the lettering. Recommended: A151 universal cleaner. 2.3 Cleaning and/or changing the chuck •...
- 7 - 3 Use / Application The HSM – 500 is designed for working with dental materials such as stainless steels, plastics, ceramics, etc. in dental laboratories using rotating tools. Warning! This tool is not designed as medical equipment. It is not to be used on human beings.
- 8 - 4.2 Contents HSM-500 bench top unit 111100 Handpiece 592013 Mains cable 111102 HSM-350 / 500 cable 111103 Handpiece holder 111896 Bench top control 111150 Cleaning set 511156 Foot switch 5 Switch functions 5.1 POWER switch The POWER switch turns the controller ON/OFF.
- 9 - 5.5 Changing rotating tools Rotating tools can only be changed when the motorised handpiece has stopped completely. Dangerous! • Turn the handpiece casing to the right to open the chuck. • Remove the rotating tool. • Push in the new tool until you feel the stop. •...
- 10 - 6.2 Removing and assembling the motorised handpiece a) Removal • Turn the POWER switch to OFF. • Undo the motor cable swivel nut from the handpiece casing. • Pull the cable plug out of the handpiece. b) Assembly •...
- 11 - 8 Troubleshooting / Correcting errors 8.1 Faults Faults Likely cause Likely solution Red LED flashes Faulty cable Replace cable Overload block Work with less pressure Open chuck on handpiece Close chuck Thermal overload switch Turn unit off and allow to cool triggered Red LED stays on System error...
Rudorffweg 15 - 17 applications D-21031 Hamburg Model: HSM-500 laboratory bench top rotary tool HSM-500 111994 Applicable EN 61010-1:1993 + A2:1995 standards: EN 60335/2/54 03.97 EN 50081-1 + EN 50082-1 Hiermit wird bestätigt, dass die oben bezeichnete Maschine den genannten EG-Richtlinien entspricht.