Plextalk DR-1 Quick Manual

This manual explains a basic operation of DR-1.
Please see the DR-1 User's Guide for more details.
1) Power
2) Function
3) Delete
4) Start
5) End
6) Rec. / Pause
7) Rew.
Note: The number indicating keys are corresponding to the number described in this
Quick Manual.
- 1 -
DR-1
Digital Recorder
Quick Manual
10) Recording
8) Play / Stop
volume slider
9) For.
The first digital recording manual
1. Setting up to get started (DR-1 User's Guide: pp. 17-24)
First, insert a CF card (available for purchase) into the card slot, plug in a microphone, and a
headphone (available for purchase) and the power adaptor into the respective terminal of DR-1, and
press the 1) Power button to turn on DR-1. After power is on, as the "date and time setting"
panel is lighted up, please set date and time by following the instruction in p. 24 of the DR-1 User's
Guide.
(NOTE: CF card, microphone, headphone and the USB cable are NOT included in the DR-1
package.
inserting / ejecting the CF card in the back of this manual.
2. Recording (DR-1 User's Guide: pp. 28-30)
1. Hold down 2) Function key
Level
2. "End" is displayed in the phrase window. (If you insert a blank CF card, the display panel shows
meter
" - - - - ".)
3. Press 6) Rec./ Pause key
"Recording" lamp flashes.
4. Adjust the recording volume with 10) Recoding volume slider while looking at the level meter.
Adjust the maximum volume to be –8dB.
5. Press 6) Rec./ Pause key
Once the recording starts, "Recording" lamp lights up.
Beginning 6. To pause recording, press 6) Rec./ Pause key
7. To stop the recording, press 8) Play / stop key
11) End
Note: Should go through pause recording, before stop recording.
3. Playback (DR-1 User's Guide: p. 31)
1. Press either 7) Rew. key
Once moving to the heading, DR-1 automatically stops after playing one phrase.
2. Press 8) Play / Stop key
Volume
shuttle
Play / Stop key
4. Overwrite recording [ Rerecord the previous recording error ] (User's Guide: p. 41)
1. When you made a reading mistake as Example 1, press 6) Rec. / Pause key
recording to overwrite the mistakenly read phrase.
(Note: If you press 8) Play / Stop key at this time, overwrite recording cannot be performed.)
2. Press 7) Rew. Key
3. Press 6) Rec. / Pause key
"The Prince invited all maidens to a ball, and Cinderella's two Stepsisters were invited to the ball."
The reread audio will be overwritten.
Example 1:
Phrase 1
The Prince invited all maidens to a ball
Her Fairy mother appeared
Phrase 3
Please purchase them separately.
and press 11) End key
to go into the recording standby state, and you will see
to start recording.
.
.
or 9) For. key to jump to the phrase you wish to listen.
to play continuously. When you wish to stop playing, press 8)
again.
to move the first phrase to be rerecorded (Phrase 2 of Example 1).
again to restart recording and read out the phrases correctly as
and only Cinderella's sister was invited to the ball. (
, (pause)
and vowed to assist Cinderella in attending the ball.
(pause)
Phrase 4
Please see the procedure for
to move to the end of title.
to pause
Phrase 2
pause)
(pause)
- 2 -