Specifications - Dri-Eaz HVE3000 Owner's Manual

Using a Philips screwdriver, remove the pump intake cover
retention screw and the plate from the bottom of the pump.
Clean off any debris from intake area. Replace plate when
finished.
Wipe out tank with a clean rag.
Reassembly
Lower pump back into bottom of tank and fold handle down. Ensure that the pump feet are firmly seated.
Replace pump rentention bracket.
Push excess power cord back through cord grip and retighten grip. The cord should be slack, but should not dangle down
and interfere with the operation of the float or the float arm assembly.
Reinstall the float ball assembly.
Replace the cover assembly.
The unit is now ready to use.

SPECIFICATIONS

07-01782B Dri-Eaz Products, Inc.
Warranty 07-01804 9 Sapphire Scientific