Samsung SPE-100 User Manual page 48

setup screen
IPv6 use : Specify the use of IPv6.

IPv6 address : Obtains the IPv6 address to access the IPv6 network.

4. When done, click [Apply (
port
1.
From the Setup menu, select the
<network (
2.
Click <port>.
3.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to

access the network encoder via the
web browser.
The default is 80(TCP).
VNP port : Set a port used to transfer video signals with the Samsung protocols.

RTSP port : Used to transfer videos in the RTSP mode; the default is 554.

Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.

The port range of the Viewer is between 4502 and 4534. If the VNP port is with this effective
range, the Viewer port should be specified the same as the VNP port.
4. When done, click [Apply (
DDnS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of
a network encoder into a general Host Name so that the user can easily remember it.
1.
From the Setup menu, select the
<network (
2.
Click <DDnS>.
3.
Select <DDnS>.
4.
Type in the DDNS items according to
the selected type.
Samsung DDNS : Select this if you

use the DDNS server provided by
Samsung Techwin.
_ setup screen
)].
)> tab.
)].
)> tab.