SoftBank 008Z User Manual page 34

32
Handset Use & Electronic Medical
Equipment
This section is based on "Guidelines on Safeguarding
Medical Equipment from Electromagnetic Waves from Mobile
Phones and Other Devices" (Electromagnetic Compatibility
Conference Japan), and "Research Report on the Influence of
Electromagnetic Waves on Medical Equipment" (Association of
Radio Industries and Businesses, March 2001).
Keep handset a minimum of 22 centimeters
from implanted cardiac pacemaker or implanted
defibrillator.
Radio waves may interfere with the operation of implanted
cardiac pacemakers or implanted defibrillators.
When using electronic medical equipment
(other than implanted cardiac pacemakers/
defibrillators) outside of medical institutions,
consult device manufacturer about the
influence of radio waves.
Radio waves may interfere with the operation of electronic
medical equipment.
Handset radio waves may affect electronic
medical equipment. Observe these guidelines in
medical institutions:
・Do not bring handset into an operating room, ICU
(Intensive Care Unit) or CCU (Coronary Care Unit).
・Turn off handset in hospital wards.
・Turn off handset even in lobbies or areas where use is
permitted if there is electronic medical equipment nearby.
・Observe the instructions of individual medical
institutions and do not use or bring handset into
prohibited areas.
Keep handset power off in crowded places such
as rush hour trains; a person with an implanted
cardiac pacemaker or implanted defibrillator
may be nearby.
Radio waves may interfere with the operation of implanted
cardiac pacemakers or implanted defibrillators.
Materials
・008Z
Parts
Outer Case
PC + ABS resin/UV coating
(Display side)
Outer Case
PC resin (GF-20) /UV coating
(side)
Outer Case
(Battery
PC resin/UV coating
Cover) ,
Volume Key
Display/
Touchscreen, Glass
Camera Panel
Camera Ring Aluminum
Light, Home
Key, Menu PMMA resin
Key, Back Key
Power Key PC resin/NCVM
Receiver Stainless steel/NCVM
Speaker Cloth
External
Device Port, Stainless steel
Screws
3.5 mm Audio
Copper alloy
Jack
SD Card
Holder, USIM PC resin (GF-10)
Card Holder
・Battery (ZEBAG1)
Parts
Outer Case PET resin
Terminals Nickel/gold plating
・AC Adapter (ZECAD1)
Parts
Outer Case PC + ABS resin
Plug Copper + nickel plating
Terminals Copper + gold plating
・Micro USB Cable (ZEDAD1)
Parts
Outer Case PVC resin
USB Terminal Iron + nickel plating
Micro USB
stainless steel
Terminal
・3.5 mm Headset with Mic (ZELAD1)
Material/Finishing
Material/Finishing
Material/Finishing
Material/Finishing