Register Home Position; Execute Auto Back Focus - Panasonic WJ-NV200VK Operating Instructions Manual

Register home position

The home position is set with the camera positioned at an already registered preset position.
Step 1
Register the camera preset positions on the "Camera
control [Advanced]" panel. (☞ Page 48)
Step 2
Click the [Setup] button.
→ The camera setup window will be displayed.
(☞ Page 49)
Step 3
Click the [D]/[C] button in the [Position] box to select
a preset number to register as the home position.
Select a preset number (1 - 256) to register.

Execute auto back focus

The auto back focus function starts to automatically adjust back focus based on a subject located in the center
of the screen by clicking the execute button. For further information about this function, refer to the operating
instructions of the camera in use.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Display the "Camera control [Advanced]" panel
(☞ page 48), and click the [Setup] button.
→ The camera setup window (☞ page 49) will be dis-
played.
Step 3
Click the [Execute] button next to "Auto back focus".
Step 4
Click the [Back] button.
→ The camera setup window closes, and the display
returns to the "Camera control [Advanced]" panel.
Note:
• On some Panasonic camera models, preset posi-
tion number 0 is registered as home position.
Refer to the "readme.txt" on the provided
CD-ROM about supported cameras.
Step 4
Click the [Regist] button.
→ The selected preset number will be registered as
the home position.
Step 5
Click the [Back] button.
→ The camera setup window closes, and the display
returns to the "Camera control [Advanced]" panel.
53