Mode Selection; Dehumidifying Mode - DeLonghi DD30P Instruction Manual

MODE SELECTION

1) Plug the appliance into a an outlet.
2) the display will show "
the appliance is in stand-by and ready for use.
If the display shows "
empty the tank or the tank is incorrectly posi-
tioned
3) Press the ON/Stand-by

Dehumidifying Mode

The display will show on the left side the room
humidity level (ex.:
the display will show the degree of humidity
you want to reach (ex.:
Press the "+" or "-" button to set the desired
humidity level (30% means a dry environment,,
80% a humid environment).
Press the " " to select the fan speed
(MIN/MAX). If you select MAX, the appliance will
operate to the maximum speed. If you select MIN,
the appliance will operate to the minimum speed.
and the noise levels will be reduced.
Press button " " to display the Temperature
on the LCD display. On the left side the display
will show first the °F and then the temperature
in °C.
After few seconds, the display will automatically
show the humidity level.
When the appliance reaches the humidity set
point the appliance will automatically stop
working but the fan will work at the minimum
speed.
As soon as the humidity increases above the set
point, the appliance will automatically
resume dehumidification operation.
Continuous Dehumidifying Function
In order to operate the continuous dehumidifying
function press button "-" untill the display will
show "--".
With this function the appliance will operate con-
tinuosly.
-- -- " to indicate that
" it's necessary to
button.
63
) and on the right side
58
).
TIMER
How to program the delayed start
function: From the OFF Position
1) With the unit in the stand-by position, press
the button. On the right side the display
will show
which the appliance will start operating.
2) Use the + and - button to set the desired
hours. Wait few seconds to set the set
appliance. The symbol
ning time will remain on the display.
3) When the selected time is reached, the
appliance will start working.
How to Program the delayed stop
function: From the ON Position
1) With the unit in the ON position, press the
button. On the right side the display will
show and the number of hours after
which the appliance will stop operating.
2) Use the + and - button to set the desired
hours. Wait few seconds to set the appliance.
The symbol
will remain on the display.
3) When the selected time is reached, the
appliance will stop working.
How to modify or disactivate the
timer
If you wish to modify the set value, press once
the timer button and pess then buttons + and -.
If you wish to disactivate the timer press the timer
button twice.
7
and the number of hours after
and the remai-
and the remaining time