Changing The Wide-Screen Mode; Basic Operations; Opening And Closing The Lcd Panel - Pioneer AVH-X7500BT Owner's Manual

Section
04 Common operations
05
Notes
! This function is enabled for playback on the
sources listed below.
— CD-DA
— MP3/WMA/AAC/WAV files on USB storage
devices
— MP3/WMA/AAC files on CD media
— iPod
— Pandora
This function is not available on an iPod with
lightning connector or Android devices.
! The sound retriever setting is turned off
when the MIXTRAX function is used in USB
source mode.
Changing the wide-screen
mode
Selecting the appropriate screen
ratio for the playback video.
1 Display the screen mode.
2 Touch the desired wide mode setting.
Full (full screen)
The 4:3 picture is enlarged in the horizontal di-
rection only, granting viewers a 4:3 TV picture
(normal picture) without any omissions.
Zoom (zoom)
The 4:3 picture is enlarged in the same propor-
tion both vertically and horizontally; ideal for a
cinema sized picture (wide screen picture).
Normal (normal)
The 4:3 picture is displayed as is, granting view-
ers no sense of disparity as the proportions are
the same as that of the normal picture.
Notes
! You cannot operate this function while driv-
ing.
10
En
! Different settings can be stored for each
video source.
! When a video is viewed in a wide screen
mode that does not match its original aspect
ratio, it may appear different.
! Remember that using the wide mode feature
of this system for commercial or public view-
ing purposes may constitute an infringement
on the author's rights protected by the Copy-
right Law.
! The video image will appear coarser when
viewed in Zoom mode.
! This function is enabled for playback on the
sources listed below.
— Disc: DVD-V, Video-CD, DivX, MPEG-1,
MPEG-2, MPEG-4
— iPod: Video
— AV: A/V data
— AUX: A/V data

Basic operations

Opening and closing the LCD
panel
The LCD panel will open or close automatically
when the ignition switch is turned on or off. You
can turn off the automatic close/open function.
! Do not close the LCD panel by force with
your hands. That will cause a malfunction.
! The automatic close/open function will oper-
ate the display as follows.
— When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
— When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will open automatically.
— Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to Protecting your unit from
theft on page 6.)
! When the ignition switch is turned OFF after
the LCD panel has been closed, turning the
ignition switch ON again (or turning it to
ACC) will not open the LCD panel. In this
case, press OPEN/CLOSE to open the LCD
panel.
! When closing the LCD panel, check to make
sure that it has closed completely. If the LCD
panel has stopped halfway, leaving it like this
could result in damage.
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children's hands and fin-
gers.
% Press OPEN/CLOSE to open the LCD
panel.
# To close the LCD panel, press OPEN/CLOSE
again.
Setting the automatic open
function
To prevent the display from hitting the shift lever
of an automatic vehicle when it is in the P (park)
position, or when you do not wish the display to
open/close automatically, you can set the auto-
matic open function to manual mode.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch Auto Flap to select whether to
open/close the display automatically or man-
ually.
Each time you touch Auto Flap the setting
switches between:
! On – The LCD panel will open or close auto-
matically when the ignition switch is turned
on or off.
! Off – You have to press OPEN/CLOSE to
open/close the LCD panel.
Turning the LCD panel horizontally
When the LCD panel is upright and hinders the
operation of the air conditioner, the panel can
be turned horizontally temporarily.
1 Press and hold OPEN/CLOSE to display
the flap menu.
2 Touch the flip down temporarily key to
flip the LCD panel down to the horizontal
position.
Flips the LCD panel down to
the horizontal position tem-
porarily.