Circuit Adjustments; Electrical Adjustment By Remote Commander - Sony KV-29AL40 Service Manual

5-1. ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER

Use Remote Commander (RM-Y165) to perform circuit adjust-
ments on this model.
NOTE: Test Equipment Required:
1. Pattern Generator
2. Frequency Counter
3. Digital Multimeter
4. Audio OSC
(1) Method of Setting the Service
Adjustment Mode
SERVICE MODE PROCEDURE
1. Standby mode. (Power off)
2.
Commander. (Press each button within a second.)
SERVICE ADJUSTMENT MODE IN
Disp. Item
(Item) data
SERVICE SYS
3. The CRT displays the item being adjusted.
4. Press or on the Remote Commander to select the item.
5. Press or on the Remote Commander to change the data.
6. Press then
SERVICE ADJUSTMENT MODE MEMORY
SERVICE WRITE
SECTION 5

CIRCUIT ADJUSTMENTS

on the Remote
0
to write into memory.
Green
Red
7. Press then
initialize.
SERVICE RESET
8. Turn set off and on to exit.
(2) Memory Write Confirmation Method
1. After adjustment, pull out the plug from the AC outlet,
then replace the plug in the AC outlet again.
2. Turn the power switch ON and set to service mode.
3. Call the adjusted items again to confirm they were adjusted.
(3) Adjust Buttons and Indicator
muting
MUTING
DISPLAY
TV/VTR
1
4
7
VOLUME
CODE SET
— —
19
KV-29AL40/KV-29AL40A/KV-29AL40C
on the Remote Commander to
Carry out step 7 when adjusting
IDs 0 to 4 and when replacing
and adjusting IC003.
POWER
VTR DBS/CABLE
TV
POWER
FUNCTION
VTR DBS/CABLE TV
FREEZE SWAP PIP
+
CH POSITION AUDIO TV/VIDEO
–
3
SLEEP DISPLAY TV/VIDEO TV
5
1 2 3
6
4 5 6
ENTER
7 8 9
JUMP ENTER
0
MTS
TV DBS
GUIDE
RESET MENU
VOL CH
RM-Y165
TV
RM-Y165