Filling Water - Gee Digital Espresso Coffee Machine Operating Instructions Manual

Starting Up

1. Filling Water

Fill the water tank before using this machine,after a long period of inactivity or when the
tank is empty.
Pull the water tank out then shift the tank to left side.
Pour about 2 liters of water into the tank(use drinking water,softened if possible).
You can take out the water tank then fill water directly.
Never operate pump without water in machine as damage to the pump
may occur.damage of pump run without water is not covered by
warranty.
2. Machine ON
Turn on the main power switch.The LCD display will indicated as following:
Push the menu button。You will hear the sound of the operating pump and after few
seconds,water will start to escape from the brewing head.Push the menu button
again,the pump stop then heater on.
The temperature which indicated on LCD display will rise up until reaches the setting
temperatue.The machine is ready to be used.
On using the machine for the first time.The filling time is arround 1
minute.。
Incorrect fill procedure may be broken the heating element.Ensure the
water comes out from the brewing head.
www.gee-coffee.com
Page 6