Related Manuals for Hudson DB47
Summary of Contents for Hudson DB47
- Page 1 HUDSON Foot - Control Radio OWNERS MANUAL D B 4 7 INSTALLATION AND OPERATING INSTRUCTIONS HUDSON MOTOR CAR CO. DETROIT, MICH., U.S.A...
- Page 2 OPERATING INSTRUCTIONS This radio incorporates the new Hudson Automatic Touch Tuning. The purpose and position of each control is shown in (Fig. 1). To Turn Radio On Press push button on right side below ON-OFF indicator window and allow receiver to reach operating temperature.
-
Page 3: Automatic Tuning
How To Obtain Service Return to your Hudson dealer, or if you are traveling go to your nearest Hudson dealer. Do not contact any other source for warranty service. - Page 4 (Fig. 2.) Connect the speaker- NOTE: The above kits are not available from the radio manufacturer. See cable socket to the plug provided on the speaker frame. your Hudson dealer. 11. Fasten the controls in place as shown in figure 1. Radio Installation Instructions NOTE: Tuning knob must be placed 3/16"...
- Page 5 Interference Elimination IMPORTANT: Use the utmost care in the following operations to insure freedom from motor noise. Be sure that good ground contacts are made between the interference condensers and the car body. If necessary, clean away paint or dirt with emery paper. Tighten all nuts and bolts securely. 1.
Need help?
Do you have a question about the DB47 and is the answer not in the manual?
Questions and answers