Recording Voice; Note For Recording; To Play A Recorded File - IRiver T10 Instruction Manual

Basic operation
RECORDING

Recording voice

1
Press and hold the
function mode screen.
Select the [RECORDING] by using the
button, then press
The recording standby screen is displayed.
2
Press the button to begin recording.
Press button to pause the recording process.
/
Press button again to restart recording.
/
3 Press the button to stop recording.
The recorded file is saved and then the recording
standby screen is displayed.
Note
The recorded file is saved as VMMDDXXX.MP3 in the VOICE folder.
(V:Voice, MM:Month, DD:day, XXX:sequential number)
Volume can not be controlled while recording.
You can adjust recording quality at the SETTINGS-RECORDING-
VOICE SETTING.(Refer to page 50)
37
button to display
,
button.
Basic operation
RECORDING

Note for recording

The recording will be stop if
- the amount of recorded data exceeds the
capacity.
- the battery is low.

To play a recorded file

1
Press and hold the
function mode screen.
Select the [BROWSER] by using the
button, then press button.
2 Select a recorded file in the RECORD or
VOICE folder by using the
button, then press
The selected file will begin playing back.
button to display
,
, , ,
button.
38