Fingerlab DM1 User's Operation Manual page 10

Just explore the endless possibilities of the mixer set-
tings : downpitch a kick, trim the HH Open very short,
set the Clap to the left, etc. Use the «SOLO» button to
listen a track without the others. Double-click the Solo
button will mute its track.
F.
When the mix is ok, go to the «FX». In this page, you
can add 2 effects to your beat in a serialised manner :
MIXER > EFFECT1 > EFFECT2 > OUTPUT
First, tap the «ON» button to turn on an effect, then
select the FX you want to use. You can use Overdrive
a fatter beat, Delay / Reverb to add space, Texturizer /
Robotizer / Dalek to make weird unexpected sound, and
Compressor to make the beat punchier.
Once you have selected an effect, you have to adjust the
parameters in the trackpad, and to adjust the Dry/Wet
(Dry means no effect, Wet means only the effect).
G.
Finally, go to the «Song» to finalize your composition
(for this part, you should have created at least 2 pat-
terns).
You will find the Song Timeline, with by default one
element in it. You'll find below the Pattern list.
To compose your song, first select a pattern in the pat-
tern list (hold down your finger on it) and drag and drop
it to the Timeline.
To delete a pattern from the Song, drag and drop it out-
side the timeline. To play the song, you will need to tap
the «SONG» button.You are now ready to compose !
Enjoy!
9