Recording From Line-In; Note For Recording; To Play A Recorded File - IRiver MP3 Player T30 Instruction Manual

Basic operation
RECORDING

Recording from Line-In

1
Press and hold the
mode screen.
Select the [RECORDING] by using the
button, then press
The recording select screen is displayed.
2 Select the [Line-In] by using the
then press button.
/
The recording standby screen is displayed.
3
Press the button to begin recording.
Press button to pause the recording process.
/
Press button again to restart recording.
/
3 Press the button to stop recording.
The recorded file is saved and then the recording
standby screen is displayed.
Note
The recorded file is saved as AUDIOMMDD_XXX.MP3 in the RECORD folder.
(MM : Month, DD : day, XXX : sequential number)
Volume can not be controlled while recording.
You can adjust recording quality at the SETTINGS-RECORDING-LINE-IN SETTING. (Refer to page 54)
39
button to display function
,
button.
/
, button,
Basic operation
Listening to music

Note for recording

The recording will be stop if
- the amount of recorded data exceeds the memory capacity of the player.
- the battery is low.

To play a recorded file

- While Recording standby mode, press
button to play recorded file.
Previous recorded file will begin playing back.
1
Press and hold the button to display function
mode screen.
Select the [BROWSER] by using the
button, then press
/
2 Select a recorded file in the [RECORD] or
[VOICE] folder by using the
button, then press
/
The selected file will begin playing back.
: to move up
: to enter the folder
/
/
,
button.
, , ,
/
button.
: to move down
: to exit the folder
40