Mitsubishi Electric MSZ-HJ25VA-E1 Service Manual page 31

Fixing the indoor coil thermisor
There are 2 forms of parts for fixing the indoor coil thermistor.
Clip shape
Position and procedure for mounting the clip-shape part
1. Set the indoor coil
thermistor in the center
of the clip-shape part.
About the
same length
NOTE:
Take care to avoid loss and accidental falling of the clip-shape part inside the unit.
Mount the clip-shape part on the marked position.
Do not pull the lead wire when removing the indoor coil thermistor.
OBH647A
Holder shape
2. Check the (marked)
mounting position.
31
3.Mount the
clip-shape part.