Table of Contents
Advertisement
Quick Links
Thanks for purchasing BulletHD- ADVENTURE Wearable Sports Camcorder.
The world's first wearable camcorder with 12.0 Mega Pixels camera!
customized mounts in box are ideally suited for mounting to yoke in motorbike,
airplanes, golf carts, vehicle, bicycles and many other round and square rail
applications, or any flat surface you can imagine!
Even any tough situation and severe weather can't stop your recording!
also shock, vibration and water resistant.
What's in the box?
●Camcorder
●Zinc U-Bolt Mount
●Rotating Flat Surface Mount
●Adhesive Mount × 2
●Mount Adapter
●Arm
CAMERA OVERVIEW
INITIAL SET UP
1. Make sure the camera is OFF before adding or removing the memory card!
2. Screw out the rear cap (open) located at the back of the camera
3. Install a Micro SD memory card (max up to 32GB) into the rear slot. To insert the micro SD card,
slide the micro SD card into the card slot on the back of the camera with the card label facing
down. The SD card will click into place once it is inserted past flush with the camera. Use your
fingernail to do this. Then screw in the rear cap till is complete lock.
4. If "no" SD Memory card is inserted into the camera, a Red/Green LED light on top of the c amera
will blink.
5. The Micro SD memory cards must be clean (no images from other sources). If you are using the
Micro SD memory card from other cameras, please make sure to format the SD memory card in your
Welcome
●Double Socket Arm
●Battery
●Hand Safety Strap
●Charger
●USB Cable
●User Manual
With our
Aluminum Armored Body -
.
It's
Advertisement
Table of Contents
Related Manuals for Silver Creation BulletHD
Summary of Contents for Silver Creation BulletHD
-
Page 1: Initial Set Up
Welcome Thanks for purchasing BulletHD- ADVENTURE Wearable Sports Camcorder. The world’s first wearable camcorder with 12.0 Mega Pixels camera! With our customized mounts in box are ideally suited for mounting to yoke in motorbike, airplanes, golf carts, vehicle, bicycles and many other round and square rail... -
Page 2: Charging The Battery
(red led will blink). Press the shooter button “ ” again to stop. In this mode the camera will take sequential photos every 3 seconds until the battery die or the Micro SD card is full. Remember to place an optional MicroSD card before your recordings! BulletHD – ADVENTURE is NOT available for Water Sports. - Page 3 PC. Blue light will turn on, then switch on the camera. Back to your PC screen, there should be a window to show the BulletHD - ADVENTURE is connected with your PC. Now open the “Date & Time setting Tool” file, double click on “time”. That’s...
- Page 4 Rotating Flat Surface Mount holds BulletHD securely. Solutions provided for motorcycles, aeroplanes, or any flat surface you can think of. Holds BulletHD steady all day long, yet you can easily remove the unit for safe keeping at the end of the day.
- Page 5 The adaptor connects directly to the arm and contains a female 1/4"-20 threaded steel stud that will connect to any standard male thread. Holds the BulletHD in place even on fast, bumpy trails. Fits on and does not slip, slide or move.
- Page 6 Camcorder Mount Adapter This mount holds the BulletHD in place and with a 360 degree rotation. This mount is compatible with the strap mount and universal mount. Adjustable Silicon Straps Comes with 2 pieces of flexible & strong adjustable silicon straps.
- Page 7 Warranty: Your BulletHD - ADVENTURE Wearable Sports Camcorder is covered by a 365 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally.
Need help?
Do you have a question about the BulletHD and is the answer not in the manual?
Questions and answers