The Web Interface; Calling Up The Web Interface - Medion P89137 Instruction Manual

The Web Interface

You can use the web interface to configure the repeater
and set it up to suit your needs or, if the connection via
WPS was not successful, to make a connection.
The appearance of the web interface will change for
each selected mode, as options will be hidden or shown
depending on whether they are required for the selected
mode.

Calling up the web interface

After being configured, the repeater is only accessible via
the management IP. The method for calling up the web
interface differs depending on the operating mode.
Access point:
Repeater/amplifier: 192.168.66.254
Client:
PLEASE NOTE!
If the repeater has already been configured, the
transfer of the IP address of the PC via which
you want to access the repeater must be set to
manual. See next section.
After Sales Support
Telephone: 1300 884 987
40
Internet: www.medion.com.au
192.168.66.1
192.168.66.253