Gigaware 25-422 User Manual

25-422
User's Guide
®
3.5" SATA Hard Drive
Enclosure
Please read this user's guide before using your new hard drive
enclosure.

Package Contents

• Aluminum Enclosure
• USB Cable
• Short Screws (4)
• AC Adapter
• Stand
• User's Guide
• Quick Start
Features
• Protects your hard drive, and allows you to use an internal
hard drive externally.
• Compatible with Hitachi, WD, Seagate and Maxtor 3.5"
SATA Hard Drives.

System Requirement

Operating System:
• Windows Vista™
• Windows ® XP
• Windows 2000
• Windows ME
• Mac OS 10.1x and Above
Connection:
• USB Port (USB 2.0, USB 1.1, USB 1.0)
2
1
Install Your Hard Drive
1. Remove the two black enclosure screws, and slide the
hard drive holder out of the enclosure.
2. Connect your hard drive to the socket inside the hard drive
holder.
3
3. Insert the four supplied short screws into the holes on
both sides of holder to secure the hard drive in place.
4. Slide the hard drive holder back into the enclosure and
secure it with two black enclosure screws.
n
Note: If you cannot slide the hard drive holder in fully, turn
over the enclosure and look at the Gigaware logo. Make sure it
is in the top left corner of the enclosure.
4