Gigaware 2601716 User Manual page 3

when the red LED indicator flashes during
operation.
1. Open the battery compartment and
remove the receiver, keeping it aside in
a safe place.
2. Insert one AA battery
matching the polarity
symbols (+ , – )
marked inside. Replace
the battery cover.
3. Set the ON-OFF
switch to ON.
3
Plug in your
Receiver
1. Turn on your PC.
2. Plug the receiver into your PC's USB
port. Your mouse and receiver are
automatically paired.
n
Note: Store the receiver back in the
mouse when not in use.
3