Related Manuals for VXI VoxStar
Summary of Contents for VXI VoxStar
- Page 1 VXi VoxStar ™ User Guide ® Compatible with most Bluetooth phones and Bluetooth ® ® enabled-computers (Windows or Macintosh...
- Page 2 (blue light flashes slowly). • Use only the power cords included with this product. • Avoid temperatures exceeding 140° F (will cause equipment failure). ™ VXi VoxStar User Guide PAGE 2...
-
Page 3: Table Of Contents
Multipoint Mode ..........12 Warranty ............26 Proximity Pairing ..........13 FCC Notice to Users ........27 Making a Call ..........14 IC Notice to Canadian Users ......28 Answering a Call ..........15 Operation While Using the Charger/Adapter ..........16 ™ VXi VoxStar User Guide PAGE 3... -
Page 4: Package Contents
PACKAGE CONTENTS 1. VoxStar™ Headset with Ear Hook 2. Cheek Pad 3. Foam Ear Cushions (1 small and 1 large) 4. Rubber Ear Cushion 5. Contoured Ear Buds (1 small, 1 medium, and 1 large) 6. Ear Bud Adapter Ring 7. -
Page 5: Proper Fit And Placement
Over-the-ear wearing style: Attach to ear hook as shown. Add foam or rubber ear cushion and optional foam cheek pad. Place the ear hook over your ear and mold it so it fits securely and comfortably. Optional cheek pad goes here ™ VXi VoxStar User Guide PAGE 5... -
Page 6: Charging The Headset
(less than 3 minutes). When the indicator turns blue—and stays blue—the unit is fully charged. It could take approximately 2.5 hours to achieve a complete charge. Headset Charging Port USB Charging Cable & DC Adapter ™ VXi VoxStar User Guide PAGE 6... -
Page 7: Battery Power Indicators
HEADSET CONTROLS While charging, the MFB’s indicator light shows the level of battery power on your VoxStar as follows: Blue light: Fully charged. Over 7 hours’ talk time. Red light: Less than a full charge. For best performance, keep charging the headset when not in use. -
Page 8: Headset Controls
Volume Up/Mute button for 2 seconds until you hear a beep. A mute reminder beep will be heard every 10 seconds. Repeat to un-mute. Volume Up/Mute Volume Down ™ VXi VoxStar User Guide PAGE 8... -
Page 9: On/Standby/Off
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 3-4 seconds until you hear a voice prompt (in English), “Power off.” A red light will flash 4 times and the headset will turn off. ™ VXi VoxStar User Guide PAGE 9... -
Page 10: Pairing With A Cell Phone
, “Your headset is connected,” and the blue light will flash slowly (once every 3–4 seconds), indicating that the headset is in Standby Mode and ready to make or receive calls. ™ VXi VoxStar User Guide PAGE 10... -
Page 11: Multiple Device Pairing
MULTIPLE DEVICE PAIRING The VXi VoxStar can pair with up to 8 devices at the same time; however, only one device may be connected to the headset at a time, unless the headset is in Multipoint Mode. Once all devices are paired, the headset will connect to the devices in reverse order of pairing. -
Page 12: Multipoint Mode
Disabling Multipoint Mode does not affect device pairings. 1. Repeat steps 1–3 for enabling Multipoint Mode. 2. If successful, you should hear a 4 descending tone “fanfare.” 3. Power off the headset. Multipoint Mode is now disabled. ™ VXi VoxStar User Guide PAGE 12... -
Page 13: Proximity Pairing
4. The headset lights will rapidly flash blue. 5. The headset initiates pairing activity, and the user has to accept the incoming pairing invitation on the phone. NOTE: This may include entering the pin number “0000” (four zeros). ™ VXi VoxStar User Guide PAGE 13... -
Page 14: Making A Call
4. To end call, quickly press the MFB on the headset and release. You will hear falling tones. The call will end and the headset will enter Standby Mode. ™ VXi VoxStar User Guide PAGE 14... -
Page 15: Answering A Call
MFB and release. You will hear 2 rising tones (and the MFB button will blink blue every second). 2. To end the call, quickly press the MFB on the headset and release. You will hear falling tones and the headset will enter Standby Mode. ™ VXi VoxStar User Guide PAGE 15... -
Page 16: Operation While Using The Charger/Adapter
OPERATION WHILE USING THE CHARGER / ADAPTER The VoxStar headset will operate from battery power or from the AC/DC charger/adapter. NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back to the phone. -
Page 17: Additional Functions
1-2 seconds. The audio will transfer to the phone; repeat to transfer audio back to the headset. When audio is transferred to the phone, the light on the headset will be off until the audio is transferred back to the headset. More functions on next page ™ VXi VoxStar User Guide PAGE 17... -
Page 18: Turn Indicator Lights On/Off
It is also possible to reconnect to the device with a quick press of the headset’s MFB. A tone and the voice prompt (in English), “Your headset is connected,” will be heard and the two devices should connect. ™ VXi VoxStar User Guide PAGE 18... -
Page 19: Reset Paired Devices List
NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will need to be paired to the device after reset has occurred. If Multipoint Mode was enabled at the time of reset, the headset will remain in Multipoint Mode. ™ VXi VoxStar User Guide PAGE 19... -
Page 20: Call Waiting/Rejecting A Call
3. To reject an incoming call while on an active call, press and hold the MFB button for 2 seconds. The incoming call will go to voicemail, if available and supported by your cell phone. ™ VXi VoxStar User Guide PAGE 20... -
Page 21: Specifications
(such as your vehicle’s hood), walls, etc., can inhibit radio wave transmission and reduce range. Talk Time: 7+ hours on a 2.5-hour charge. Standby Time: Up to 195 hours on a 2.5–hour charge. ™ VXi VoxStar User Guide PAGE 21... -
Page 22: Functions & Indicators
Connect to A2DP Blue, quick NONE “Your headset double flash is connected” Volume Up Volume Up NONE Single tone NONE (quick press) Volume Down Volume Down NONE Single tone NONE (quick press) ™ VXi VoxStar User Guide PAGE 22... - Page 23 Two rising tones NONE (quick press) Active Call per second End a Call Blue flash, every Two falling tones NONE (quick press) 4 seconds Reject a Call NONE Two falling tones NONE (2 seconds) ™ VXi VoxStar User Guide PAGE 23...
- Page 24 Blue, double flash NONE “Your headset is Device disconnected” Link Loss NONE Red, slow flash NONE “Out of range” Low Battery NONE Red, fast flash Long, high tone “Battery low” @ 20 seconds ™ VXi VoxStar User Guide PAGE 24...
- Page 25 (quick press) Disable MFB/Volume Up & NONE 4 falling tones NONE Multipoint Mode Volume Down (5-6 seconds) Start Proximity Blue, rapid flash 2 half-second “Discovering” (2–3 seconds) Pairing then Volume Down low tones (RSSI) ™ VXi VoxStar User Guide PAGE 25...
-
Page 26: Warranty
(1) VXi warrants that your VXi VoxStar headset system will be free from defects in material and workmanship for one year from the date of purchase. If, during the first year from the date of purchase, your VXi VoxStar headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge. -
Page 27: Fcc Notice To Users
Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved by VXi Corporation will void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. -
Page 28: Ic Notice To Canadian Users
RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la classe B conforme à la norme NMB-003 du Canada). ™ VXi VoxStar User Guide PAGE 28... - Page 29 VXi Corporation | 271 Locust Street, Dover, NH 03820 USA Toll Free | Llamada sin cargo | Sans frais | Gebührenfrei in den USA: (800) 742-8588 Phone | Teléfono | Téléphone | Tel.: 1 603 742-2888 vxicorp.com APN 203331A-EN © 2014 VXi Corporation...