Connecting To A Usb Hard Drive In Vista - IOGear M1057 Installation Manual

Connecting to a USB hard drive in VISTA

1. Connect the USB cable of the USB hard
drive to the USB port on the USB Net
ShareStation, and make sure both the USB
hard drive and the USB Net ShareStation
are powered on. Right click on the device
icon and select Connect to connect to the
device. Then right click again on the device
icon and select "My Computer" to bring up
My Computer window. Or you may simply
double click the hard drive icon to bring up
My Computer window.
2. You will now see the external hard drive
become available as if it were directly
connected to your computer.
35