Maintenance - Sharper Image EC-B160 Instruction Manual And Warranty Information

Using the Snooze Bar Functions
Snooze Operation
Press the SNOOZE bar after the alarm sounds. The alarm will be silenced and
return 9 minutes later. Snooze can be pressed several times during the 1 hour
alarm cycle. You may use this feature until you turn the alarm OFF.
Nap Operation
The Nap function will wake you after a nap of 15, 30, 45 or 60 minutes –
without the need to change your regular al1 or al2 settings.
1. If the system is playing audio, press the POWER button to OFF.
2. Toggle through the SNOOZE bar to the corresponding time of your choice: 15, 30,
45 or 60 minutes – as it will show on the LCD display.
3. Toggle through the Alarm MODE button until the corresponding wake mode icon
of your choice lights up on the LCD display.
4. The alarm will sound to wake you up after the selected number of minutes
has passed.
5. To cancel the Nap timer, press the SNOOZE bar until OFF shows on the LCD
display, which indicates the Nap function is disarmed.
10

Maintenance

To Store
You may leave the unit on display, or you can store it in its box in a cool, dry place.
To Clean
Use only a soft dry cloth to clean the enclosure of the unit.
NEVER use liquids or abrasive cleaner to clean.
Modif ications not authorized by the manufacturer may void user warranty.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1 1