Anritsu MG3710A Configuration Manual
Vector signal generator
Hide thumbs
Also See for MG3710A:
- Operation manual (1092 pages) ,
- Application note (24 pages) ,
- Operation manual (268 pages)
Subscribe to Our Youtube Channel
Related Manuals for Anritsu MG3710A
Summary of Contents for Anritsu MG3710A
- Page 1 Configuration Guide MG3710A Vector Signal Generator Configuration Guide...
- Page 2 MG3710A Vector Signal Generator MG3710A Vector Signal Generator Reference Oscillator Pre-installed – Aging Rate: ±1×10 /day MG3710A-002/102 High Stability Reference Oscillator – Aging Rate: ±1×10 /day MG3710A-001/101 Rubidium Reference Oscillator – Aging Rate: ±1×10 /month Frequency Range for 1stRF ∗...
- Page 3 MG3710A-017/117 MG3710A-011/111 Universal Input/Output 2ndary HDD (with J1539A) MG3710A-021/121 MG3710A-313 BER Test Function Removable HDD ∗ (with J1539A) Not simultaneously with Opt. 029 MG3710A-029 J1539A OS Upgrade to Windows 7 AUX Conversion Adaptor ∗ Not simultaneously with Opt. 313 ARB Memory Upgrade ∗...
- Page 4 Functions marked standard are built-in at factory shipment. Options and software can be added as necessary. Two RF outputs (1stRF and 2ndRF) can be installed in the MG3710A. The options for each RF output are color coded as follows: Options for both...
- Page 5 (Standard +17 dBm) Opt. 041/141 installed and Opt. 043/143 not installed, CW High Power Extension for 1stRF MG3710A-041 Level setting range: Hi limit +30 dBm Opt. 041/141 installed and Opt. 043/143 installed, CW Level setting range: Hi limit +25 dBm...
- Page 6 (256 MB) Upgrades ARB size to 256 Msamples (1 GB) ARB Memory Upgrade 256 Msample for 1stRF MG3710A-045 With Opt. 048/148 not installed, installs 1 × 256 Msamples With Opt. 048/148 installed, installs 2 × 256 Msamples Upgrades ARB size to 1024 Msamples (4 GB)
- Page 7 Choose the analog input/output options. Name Option No. Additional Information Installs analog I/Q input and output connectors on rear panel of main frame but only Analog IQ Input/Output MG3710A-018 supports SG1 side (1stRF side) Step. 8 Choose the external input/output options. Name Option No.
- Page 8 MG3710A and the signal is output by selecting them. When outputting a waveform pattern from the MG3710A, no signal is output unless a license for that system is installed in the main frame. Note: Since the size of each waveform pattern is different, sometimes waveforms cannot be output if the memory upgrade option has not been installed.
- Page 9 Since it runs on any PC, the supported functions and parameter range can be verified before purchase. When outputting a waveform pattern from the MG3710A, no signal is output unless a license for that system is installed in the main frame.
- Page 10 Retrofit to Current MG3710A Hardware Option Retrofits The following hardware options can be retrofitted. The MG3710A must be returned to the Anritsu plant for hardware retrofitting. Name Option No. Additional Information Reference Steps Options for both 1stRF and 2ndRF Rubidium Reference Oscillator MG3710A-101 Not simultaneously with Opt.
- Page 11 Software Option Retrofits The following software options can be retrofitted. The MG3710A does not require return to the Anritsu plant for software retrofitting. Name Option No. Additional Information Reference Steps Waveform Patterns DFS Radar Pattern MX370073A DFS (ETSI) Waveform Pattern...
- Page 12 3: Select any one. Selected memory size enabled and all others disabled. ∗ 4: Removable HDD (Opt. 313) cannot be upgraded to Windows 7. Opt. 313 can only be applied to MG3710A with Opt. 029 (Windows 7) applied. Maximum Waveform Pattern Size and Required Options for Simultaneous Use •...
- Page 13 ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ MG3710A Configuration Guide...
-
Page 14: Ordering Information
Select when ordering main frame, Built-in BER measurement, Bit Rate: 100 bps to 40 Mbps J1539A AUX Conversion Adapter required for Data/Clock/Enable signal input MG3710A-029 OS Upgrade to Windows 7 Select when ordering main frame, Upgrades MG3710A OS to Windows 7 (32 bit, Professional) (retrofit not supported) MG3710A-101 Rubidium Reference Oscillator Retrofit... - Page 15 TD-SCDMA IQproducer IQproducer software, license for main frame, manual (PDF) - Optional accessories - W3580AE MG3710A Operation Manual (Main Unit) Booklet, for MG3710A Main Frame (Operation, Remote Control) W2496AE MG3710A Operation Manual (IQproducer) Booklet, for IQproducer (Operation for Common Parts) W3581AE...
- Page 16 Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza, Anritsu A/S (Service Assurance) Phone: +55-11-3283-2511 No. 1 Science Museum Road, Tsim Sha Tsui East, Fax: +55-11-3288-6940 Anritsu AB (Test & Measurement) Kowloon, Hong Kong, P.R. China • Kay Fiskers Plads 9, 2300 Copenhagen S, Denmark Phone: +852-2301-4980...
Need help?
Do you have a question about the MG3710A and is the answer not in the manual?
Questions and answers