Table of Contents
Advertisement
Setting the Polling Interval Widows -XP
The polling interval will allow the confi guration
utility to pull information from your network to
fi nd out the status of all the connected DVI Net
ShareStations and USB devices. By default,
this feature is not automatically confi gured. You
may set a time so that the server will perform
the polling automatically. To confi gure the polling
interval, in the IOGEAR USB Server utility, click
on File -> Settings -> Polling Interval.
You may set a number from 1 – 60 in the
"Seconds" box. Click on Submit to
allow the new interval setting to take effect.
Once you have set a number the utility will
automatically update any changes made to
server in the main dialog box.
60
Advertisement
Table of Contents
