Connecting To A Usb Hub In Vista - IOGear GUIP201 M1023 Installation Manual

Connecting to a USB hub in Vista

1. If you have more than one USB device that you would like to share over your network, you may
add a USB 2.0 hub (4-port maximum) to the USB Net ShareStation. Connect the USB cable of the
USB hub to the USB port on the IOGEAR USB Net ShareStation, then connect the USB device(s) to
the USB ports on the USB hub. Make sure the power adapter of the USB hub is plugged in and
powered on.
Please note that the USB Net ShareStation can only support up to 4 USB devices through a USB 2.0
Hub and certain USB devices require a direct connection to your computer in order to function at full
capacity.
47