Advertisement
Pull
Remote Control Instruction Manual
1¡¢
Under play mode, press up/down to select songs.
Under radio mode, press up/down to select channels.
2¡¢ Press – button to decrease volume, and press +
button to increase volume.
3¡¢ Play/Pause
4¡¢ Return to master interface button.
5¡¢ Power supply switch, press this button to start,
and long press this button to shut down¡£
6¡¢ Press this button to shift mode.
7¡¢ Mute button.
8¡¢ NFC signal transmitter location
1. Attentions
1) Require mobile phones equiped with NFC function.
2) The phone with system under Android 4.1 is required to download and install mobile client
software for normal use from www.eonon.com. Adroid 4.1 or above systems can work
directly without the step.
3) For the moment, the effective distance for NFC is within 2CM. If over 2CM, the connection
may be affected. For every connecting, please put mobile phone's NFC antenna as close
as possible to the NFC logo
on the remote controller.
2. Operation Steps
1¡¢ Activate Bluetooth and NFC in mobile phone, both functions should be open at the same
time.
2¡¢ Put mobile phone back cover NFC signal position close to the silk print location
remote controller, then the Bluetooth of mobile phone and DVD unit will connect
automatically, no need to pair them manually or enter a password. After well connection,
car DVD screen's Bluetooth icon will become illuminated. The following Bluetooth related
functions' operation can refer to Bluetooth user instructions.
(Notes: When the mobile phone's NFC antenna location is just against to the DVD panel's
silk print position, they can be connected the most easily. As different mobile phones's NFC
antenna location are different, users can move slowly the phones body close to
NFC antenna location can be found by this method.)
3¡¢ Bluetooth will be disconnected once the mobile phone NFC antenna close to
It will be reconnected if close to it again. With this regular patterns, can connect or
disconnect the operation.
1
of the
.
again.
2
Advertisement
