Power Steering Fluid - Opel 2014 Insignia Owner's Manual

2014 insignia
Hide thumbs Also See for 2014 Insignia:
Table of Contents

Advertisement

On another version the filling line
mark is inside the filler opening. To
check open the cap.
Additional cooling circuit for Turbo
engine
Coolant container is fixed at the air
cleaner housing.
If the cooling system is cold, the
coolant level should be above the
filling line mark. Top up if the level is
low.
General
9 Warning
Allow the engine to cool before
opening the cap. Carefully open
the cap, relieving the pressure
slowly.
To top up use a 1:1 mixture of
released coolant concentrate mixed
with clean tap water. If no coolant
concentrate is available, use clean
tap water. Install the cap tightly. Have
the coolant concentration checked
and have the cause of the coolant
loss remedied by a workshop.

Power steering fluid

Caution
Extremely small amounts of
contamination can cause steering
system damage and cause it to not
work properly. Do not allow
Vehicle care
contaminates to contact the fluid
side of the reservoir cap/dipstick or
from entering the reservoir.
Power steering fluid level normally
does not have to be checked. If an
unusual noise sounds during steering
or the power steering reacts
conspicuous seek the assistance of a
workshop.
221

Advertisement

Table of Contents
loading

Table of Contents