After Starting Washing; Required Time; Changing Settings; Unlocking The Door - Panasonic NA - 140VX3 Operating Instructions & Installation Instructions

Required time

Times depend on the programmes and
temperature settings that have been
selected.
- Actual times may differ slightly from
those shown.
- The displayed times include the time
needed for the water to fill up and to
drain out, thus they vary depending on
water pressure, drainage and amount of
laundry.
- If you change the functions while
washing, the displayed times may
change.
- If the laundry in the drum needs to be
balanced, times will be extended.

Changing settings

After washing has started, the programme,
temperature, and preset time cannot be
changed.
- To change the programme or temperature
settings, turn the appliance off and then
on again.
- To change the rinse or spin settings while
washing, press the Pause button once
the appliance is full of water.
- You can change the spin speed, Extra
Rinse and Easy Ironing function during
the washing process.
- No settings can be changed after the
washing process has finished.

After Starting Washing

Unlocking the door

The door automatically locks while in use,
and the symbol is shown while the door
is locked. A click will be heard when the
door locks or unlocks.
Note
- While the door is locked, if the
appliance is switched off, or if there
is a power interruption, the door
stays locked until the switch is turned
on again.
- This is different from the child safety
lock. (See page 24.)
Press the Start button to unlock the
door during operation.
After about 1 minute, the drum stops
spinning, and the door will automatically
unlock.
If the door does not open, see page 29.
Caution
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds might come out
of the door and the door opening. You
may need a towel to soak them up.
Washing Instructions - 25