Adaptive Cruise Control (Acc) - Honda 2015 Accord Reference Manual

ADAPTIVE CRUISE CONTROL (ACC)

Operating ACC
Check the MID for
information.
How to Use ACC
Turning ACC On
1. Press MAIN.
2. ACC appears in the MID.
Using ACC
1. Accelerate to the desired speed (above 25 mph).
2. Press SET/- and release the accelerator pedal. The set speed is fixed, and
ACC begins.
3. To increase speed, press RES/+. To decrease speed, press SET/-.
Standard Cruise Control
1. Press and hold the Distance button.
2. A beep sounds, and the selected mode appears in the MID.
Canceling ACC
There are three ways to cancel:
• Press MAIN.
• Press CANCEL.
• Tap the brake pedal.
22
Changing Vehicle Distance
MAIN RES/+
CANCEL Distance
SET/-
Set a space interval between your vehicle and the vehicle ahead of you. When the
vehicle ahead changes speed, ACC senses the change and increases or decreases your
vehicle's speed to maintain a set following distance or speed.
Control the distance between your vehicle and the vehicle in front of you.
ACC automatically adjusts the following distance based on the range
selected and your vehicle speed.
Extra Long
Long
Range
range
The selected range and set speed are shown on the MID.
Range MID Screen
Extra Long
Long
Middle
Short
Note: The ACC radar sensor in the front grille can detect and monitor the distance of a
vehicle up to approximately 100 yards ahead.
Normal
Short
range
range
Press the
Distance button
to shuffle through
four ranges.
If a vehicle enters the ACC
range, a beep sounds and a
vehicle icon appears on the MID.
If there is no vehicle ahead of
you, a dotted-line vehicle icon
appears on the MID.
23