Maximum Heatsink Temperature; Alc Output; Mis-Match Protection; Conectors - RF Technology PA 150 Operation And Maintenance Manual

5.7

Maximum Heatsink Temperature

90 degrees C.
5.8

ALC Output

The ALC is intended for connection to the T150. It supplies a voltage which
decreases with increasing power or temperature.
5.9

Mis-Match Protection

The amplifier is protected from damage when operating into a VSWR of 10/1 at
all phase angles.
6 Connectors

6.1 Antenna Connector

Type N Female mounted on the module rear panel

6.2 Power and I/O Connector

25 pin "D" Male mounted on the rear panel

6.3 Test Connector

9 pin "D" Female mounted on the front panel.
RF Technology PA150
Connectors
Page 9