Download Print this page

West Marine Jetty Express II Assembly Instructions page 4

Folding bike

Advertisement

As Easy As 1-2-3
1- Unlock and fold
the pedals
Simply push the pedal in
slightly towards the bike
frame and lift up on the end
of the pedal.
2- Unlock and fold
the handle bars
Pull up on the Handle Bar
Stem Lock quick connect
lever to release it. Rotate
the quick connect lever and
spring loaded bolt down
to the side. While pressing
the safety locking button
in, swing the Handle Bar
Assembly down to the side
of the frame.
3- Unlock and fold
the frame
Standing on the chain side
of the bike, rotate the black
plastic safety lock up until
it is clear of the Frame Lock
handle's safety pin. Pull
the handle out away from
the frame, opening it. The
clamp will disengage and
allow the two halves of the
frame to separate. Swing
the front and rear halves of
the bike together.
Optional- Lower the
Seat Assembly
To save additional space,
you can lower the Seat
Assembly all the way down
to the frame. Pull up the
Quick Release Seat Lever
and flip over. Allow the Seat
Assembly to slide all the way
down to the frame.
4
As Easy As 3-2-1
3- Unfold and lock
the frame
Standing on the chain
side of the bike, swing the
front and rear halves of the
bike into position. Close
the Frame Lock handle
by pushing it against the
frame, while ensuring the
clamp has securely engaged
the back half of the frame.
Rotate the black plastic
safety lock down until it
completely covers the
Frame Lock handle's safety
pin. Always verify the safety
locking pin cover is properly
positioned when riding your
bike.
2- Unfold and lock
the handle bars
While pressing the safety
locking button in, swing
the Handle Bar Assembly
up into position. Release
the button, allowing the
two halves of the stem to
align. Rotate the quick
connect lever and spring
loaded bolt up into position
and fold down the quick
connect lever. Be sure that
the spring loaded bolt is
tight and the fold-down
lever rests flush against the
surface. It should lock firmly
in place.
1- Unfold and lock
the pedals
Simply lift up on the pedal
until it snaps into place.
See "Adjustments" on
page 6 for additional tips.
5

Advertisement

loading