Volvo C30 2012 Owner's Manual page 256

10 Infotainment system
Audio functions
Streaming audio via Bluetooth *
General
10
If the car is equipped with Bluetooth hands-
free* and a mobile phone is connected then the
audio system can wirelessly play back stream-
ing audio files from the mobile phone. Naviga-
tion and control of the sound can be carried out
via the centre console buttons or via the steer-
ing wheel keypad*. In some mobile phones it is
also possible to change tracks from the phone.
To be able to play back the audio a device must
first be paired and connected to the car. For
information about pairing and connection, see
page 276. BT must also be selected as audio
source, see page 252.
NOTE
The Bluetooth mobile phone must support
the Audio/Video Remote Control Profile
(AVRCP) and Advanced Audio Distribution
Profile (A2DP). The phone should use
AVRCP version 1.3, A2DP 1.2. Otherwise
some functions may not work.
2 Premium Sound.
*
254
Option/accessory, for more information, see Introduction.
NOTE
Not all mobile phones available in the mar-
ket are fully compatible with the
Bluetooth function in the car's audio sys-
tem. Volvo recommends that you contact an
authorised Volvo dealer or visit
www.volvocars.com for information on
compatible phones and external media
players.
Playback
Press the MODE button repeatedly in order to
select BT as audio source.
Audio file selection can take place in the fol-
lowing three ways:
•
Select TUNING (4) clockwise or anticlock-
wise.
•
Use the or button (6) of the naviga-
tion control to scroll to the desired audio
file.
•
With the or buttons on the steering
wheel keypad.
Audio settings
Adjusting audio settings
Press SOUND (5) repeatedly to browse among
the following options. Adjust by turning
TUNING.
•
BASS - Bass level.
•
TREBLE - Treble level.
•
FADER
– Balance between the front and
rear speakers.
•
BALANCE – Balance between the left and
right-hand speakers.
•
2
CENTRE - Level for centre speaker.
Three channel stereo or Pro Logic II must
be activated before adjustment is possible,
see under the heading Activating/deacti-
vating surround sound below.
•
2
SURROUND - Level for surround. Pro
Logic II must be activated before adjust-
ment is possible, see under the heading
Audio settings below.