English Contents Components A Bluetooth Keyboard B Charging Cable C Quick Start Guide D Bluetooth Status Indicator Light Connect Button Power Indicator Light G On/Off Switch H MicroUSB Charging Connector Charging Indicator Light...
Connect the Keyboard to Your iPad Insert your iPad into the Keyboard sleeve. Turn the On/Off Switch on. The Power Indicator Light glows. NOTE: When you first turn on the Keyboard, both the Power Indicator Light and the Bluetooth Status Indicator Light glow for 3 seconds. You cannot connect the Keyboard to your iPad until only the Power Indicator Light glows.
The Keyboard now appears on your iPad screen. Tap Bluetooth Wireless Keyboard. Your iPad screen displays a passkey. Enter the passkey on the Keyboard, and press Enter. Your iPad screen shows the Keyboard as Connected. On the Keyboard, the Bluetooth Status Indicator Light turns off.
Make sure that both your iPad battery and the Keyboard battery are sufficiently charged. If this does not solve the problem, please contact Kensington Support at kensington.com. Technical Support Technical support is available to all registered users of Kensington products. Technical Support contact information can be found on the back page of this manual.
WARNING! IMPORTANT SAFETY INSTRUCTIONS Failure to read and follow these safety instructions could result in fire, explosion, electrical shock or other hazard, causing serious and/or fatal injury and/or property damage. • Do not modify, disassemble, open, drop, crush, puncture, or shred the KeyFolio™ Pro Perfomance Keyboard Case for iPad® 2 (which will be known as the KeyFolio for the remainder of this instruction guide).
Kensington and the ACCO name and design are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands. KeyFolio is a registered trade mark of ACCO Brands. iPod is a trademark of Apple Inc., registered in the U.S.