Leotec LEBTSPK01 User Manual page 8

X. Product Parameters
Product Model：LEBTSPK01
Bluetooth Specifications：Bluetooth V2.1+EDR
Transmission Distance：≤10M (depending upon operation environment and devices to which it connects)
USB Recharge Voltage: DC 5V
Built-in Battery: Lithium battery
Output Power: 3W×2
Frequency Response: 90Hz-20KHz
Sensitivity: 80db±2db
Signal to Noise Ratio (SNR): ≥76dB
Product Dimensions: 271×69×43MM
XI. System Composition
5） Speaker
6） 3.5 Audio Cable
7） USB Power Cable
8） User's Manual/Warranty Card
XII. Common Function Description
Power-on Status:
indicator
flashing. The volume is set to 60% by default.
Bluetooth Connection: Once switched on, the speaker starts searching for other Bluetooth devices
automatically and at
is failed.
Call Pick-up: After connected with the cellphone successfully, the speaker beeps when a call comes in. Press
to
pick it up and to terminate conversation, press
AUX Playback:Use the supplied audio cable to connect the speaker to another music player such as computer
by
plugging one end to the speaker's AUX port and the other end to the music player's audio port.
When the music player starts playing music, the speaker sounds right away. Tracks can be
selected and volume adjusted only by the music player.
Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before
recharging,
1set
1piece
1piece
1copy
Press the Power Button to turn the speaker on and it beeps simultaneously with the blue
the same time, the bluetooth indicator goes on and off. When found a Bluetooth device,
the speaker prompts whether to pair up or not. If selected Yes, it pairs up with the device
and meanwhile, the blue indicator flashes slowly and a beep is also generated by the
speaker. If failed to detect any other Bluetooth device within 5minutes, the speaker will
shut itself down. Turn it back on again to start search. All the paired devices will engage
in automatic connection when the speaker is turned on.
Hints: Please recharge when the battery loses its power considerably or the connection
plug the mini-USB end of the supplied USB cable to the speaker's USB port and the
other end to the USB port of the computer or the USB recharger.
one more time.