Summary of Contents for Sound Acoustics PRO-RVC
- Page 1 Premium Residential & Commercial Audio/Video Products PRO-RVC REMOTE LINE / MIC MIXER Owner's Manual...
- Page 2 RJ45 female jack for connecting the PRO-RVC. When using multiple PRO-RVC's (max 3) connect the OUT1 from PRO-RVC # 2 to the IN1 of the first PRO-RVC and repeat for PRO-RVC #3. See the following diagram.
- Page 3 Connecting to Non Sound Acoustic Amplifiers: It is possible to use the PRO-RVC with other manufacturers amplifiers, mixers and receivers. Follow the steps listed above and install the optional RVC-ADAPT between the master PRO- RVC and the amplifier. The RVC-ADAPT converts the RJ45 output of the PRO-RVC to individual line level output, phantom power and master volume control.
- Page 4 (turned fully counter clockwise) and adjust slowly. This will avoid feedback and possible damage to the amplifier and loudspeakers. Once up to 3 PRO-RVC's are properly connected, re-connect the AC power cord of the amplifier to the AC wall outlet and power the amplifier ON.
-
Page 5: Specifications
Connect a microphone into the microphone input jack on the PRO-RVC. Turn the master volume control up to 12:00 50% full. Slowly turn the microphone volume control up while speaking into the microphone until you reach the desired volume level. Repeat the same procedure for the dual RCA jacks with a CD, DVD or other music source.
Need help?
Do you have a question about the PRO-RVC and is the answer not in the manual?
Questions and answers