Safety Inspection Checklist - Invacare Lightweight Aluminum Wheelchair Owners Operating & Maintenance Manual

Lightweight aluminum wheelchair

Hide thumbs

Table Of Contents

Table of Contents

NOTE: Regular cleaning and inspection will reveal loose or worn parts and enhance the smooth operation

of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other

vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.

Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow

these maintenance procedures:

ITEM

GENERAL (TROUBLESHOOTING)

1.Wheelchair rolls straight (no excessive drag or pull

to one side).

WHEEL LOCKS (PROCEDURE 6)

1.Do not interfere with tires when rolling.

2.Pivot points free of wear and looseness.

3.Wheel locks easy to engage.

SEAT AND BACK UPHOLSTERY (PROCEDURE 3)

1.Inspect for rips or sagging.

2.Inspect for loose or broken hardware.

TIRES (PROCEDURES 4 and 5)

1.Inspect for flat spots and wear.

CAUTION: As with any vehicle, the wheels and

tires should be checked periodically for cracks and

wear, and should be replaced when necessary.

REAR WHEELS (PROCEDURE 4)

1.No excessive side movement or binding when lifted

and spun.

HANDRIMS (PROCEDURE 4)

1.Inspect for signs of rough edges or peeling.

SPOKES

1.Inspect for cracked or broken spokes.

FRONT CASTER (PROCEDURE 5)

1.Inspect wheel/fork assembly for proper tension by

spinning caster; caster should come to a gradual stop.

2.Loosen/tighten locknut if wheel wobbles noticeably or

binds to a stop.

3.Wheel bearings are clean and free of moisture.

CAUTION: As with any vehicle, the wheels and

tires should be checked periodically for cracks and

wear, and should be replaced when necessary.

CLEANING

1.Clean upholstery and armrests.

QUESTIONS ABOUT THIS PRODUCT?