Advertisement

BCB 33 A F (AUS)
English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
Contents
Operating Instructions, 1
Français
Mode d'emploi
COMBINE REFRIGERATEUR/CONGELATEUR
Sommaire
Mode d'emploi, 1
Description de l'appareil, 3
Energy Saving, 4
Description de l'appareil, 5
Installation, 10
Mise en marche et utilisation, 11
Entretien et soin, 11
Précautions et conseils, 12
Anomalies et remèdes, 13
AR
‫تعليمات التشغيل‬
‫ﺓﺝﺍﻝﺙﻭ ﺩﺍﺭﺏ‬
‫الفهرس‬
1
1

Advertisement

Table of Contents
loading

Summary of Contents for Ariston BCB 33 A F

  • Page 1: Table Of Contents

    BCB 33 A F (AUS) English Operating Instructions ‫تعليمات التشغيل‬ REFRIGERATOR/FREEZER COMBINATION ‫ﺓﺝﺍﻝﺙﻭ ﺩﺍﺭﺏ‬ Contents ‫الفهرس‬ Operating Instructions, 1 Assistance, 2 Description of the appliance, 3 Energy Saving, 4 Description of the appliance, 5 Installation, 6 Start-up and use, 7...
  • Page 2: Assistance

    Assistance Before calling for Assistance: Check if the malfunction can be solved on your own (see • Troubleshooting). • If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre Communicating: • type of malfunction • appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment. Never call on unauthorized technicians and always refuse spare parts which are not originals. Assistance Avant de contacter le centre d’Assistance : • Vérifiez si vous pouvez résoudre l’anomalie vous-même (voir...
  • Page 3: Description Of The Appliance

    Description de l’appareil Description of the appliance Tableau de bord Control panel 1. ON/OFF 1. ON/OFF Cette touche sert à allumer l’appareil tout entier (compartiment The entire product (both the refrigerator and freezer compartments) réfrigérateur et compartiment freezer). may be switched on by pressing this button. Le voyant indique que le produit est éteint bien que sous tension. The indicator light indicates that the product is off, even if it is Une fois que le produit est allumé, ce voyant n’est plus visible.
  • Page 4: Energy Saving

    Energy Saving function The Energy Saving function can be activated to optimise energy con- sumption while maintaining the cooling performance of the product. This function maximises the amount of energy saved. Under these conditions, the display remains off even when the door is opened. The function is activated by pressing and holding the super freezer and FRZ (+) buttons simultaneously for at least 6 seconds. Once the function has been activated, all LEDs will light up for 2 seconds to confirm activation, and the temperature setting of +5, -18 will appear on the display. The display switches off after 5 seconds. To change the temperature, simply press the + and – buttons until you have rea-...
  • Page 5: Description Of The Appliance

    Description of the appliance Description de l’appareil Overall view Vue d’ensemble The instructions contained in this manual are applicable to different Ces instructions d’utilisation s’appliquent à plusieurs modèles, model refrigerators. The diagrams may not directly represent the il se peut donc que les composants illustrés présentent des appliance purchased. For more complex features, consult the différences par rapport à ceux de l’appareil que vous avez acheté. following pages. Vous trouverez dans les pages suivantes la description des objets plus complexes.
  • Page 6: Installation

    Installation Refrigerator Compartment When the appliance is switched on the refrigerator compartment is set to its default value of +5°C. We recommend that the SUPER ! Before placing your new appliance into operation please read COOL function is set (the refrigerator status bar continues to these operating instructions carefully. They contain important display the set value) in order to accelerate the cooling process information for safe use, for installation and for care of the of the compartment. After a few hours it will be cool enough for appliance. food to be placed inside. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Navigating the display Setting the temperatures: Positioning and connection...
  • Page 7: Using The Refrigerator To Its Full Potential

    due to the ozone produced as the charge in the lightning bolts 1. Check that OK appears clearly on the indicator light (see is released; this is completely normal. The amount produced by diagram). the device is very small and abates quickly as the antibacterial action takes place. Device is activated pressing the dedicated switch located in right side of the Oxigen device. 2. If the word “OK” does not appear it means that the temperature is too high: adjust the REFRIGERATOR OPERATION knob to a higher position (colder) and wait approximately 10 hours until the temperature has been stabilised. 3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added With the Active Oxigen switched on, the device will operate or if the refrigerator door has been opened frequently, it is a repeted cycle until the key is pressed again. There will be normal for the indicator not to show OK. Wait at least 10 hours an Ozone emission noticed by the switching on of the green...
  • Page 8: Maintenance And Care

    Maintenance and care Precautions and tips Switching the appliance off ! The appliance was designed and manufactured in compliance During cleaning and maintenance it is necessary to disconnect with international safety standards. The following warnings are the appliance from the electricity supply: provided for safety reasons and must be read carefully. 1.Press the ON/OFF button to switch off the appliance. 2.Pull the plug out of the socket. ! If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation, This appliance complies with the following Community Directives: hold the ON/OFF button down for more than two seconds. To - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;...
  • Page 9: Assistance

    Respecting and conserving the • The refrigerator or the freezer have been over-filled. • The atmospheric temperature of the area surrounding the environment appliance is lower than 14°C. • Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near The food inside the refrigerator is beginning to freeze. heat sources. • The temperature that has been set is too low (see Start-up and • Try to avoid keeping the door open for long periods or opening use). the door too frequently in order to conserve energy. • Do not fill the appliance with too much food: cold air must The motor runs continuously.

Table of Contents