Rear Panel - Tascam CD-RW900mkII Owner's Manual

2 − Features of the CD-RW900MKII
SYNC REC key
Use this key to turn synchronized
d
recording on and off before starting to record (see
"Synchronized recording" on page 26 for details).
INPUT SELECT
Use this key to select the different
f
audio inputs and the input combinations (see "Input
selection" on page 24 for full details).

Rear panel

ANALOG IN (UNBALANCED) (L, R)
h
jacks accept analog audio signals from suitably-
equipped units ( 10 dBV).
at –
ANALOG OUT (UNBALANCED) (L, R)
j
jacks output analog audio signals (at –10 dBV levels) to
suitably-equipped units.
DIGITAL COAXIAL (IN, OUT
k
accept and output digital audio in standard consumer
format (SPDIF).
DIGITAL OPTICAL (IN, OUT)
l
optical connectors accept and output digital audio using
optical fiber connectors.
AC IN jack
Connects the power cable supplied.
;
12
TASCAM CD-RW900MKII
These RCA
These RCA
) These two RCA jacks
These two TOSLINK
KEYBOARD jack
An IBM PC-compatible keyboard
g
with PS/2 interface can be connected to this terminal to
enable certain operations of the CD-RW900MKII with
the keyboard. Title input operations, in particular, can
be performed with greater efficiency.