Tabby Tablet User Manual page 8

From memory card
This unit supports SD card up to 32 GB
To insert a Memory card
First open the door of the jacks/slots at the bottom of
the unit.
Insert the card correctly with the contact pin facing
downwards as illustrated below. Pushing the card into
the SD card slot, then you should hear a click when
the card is seated correctly. You may damage the
is inserted in or ejected from the device, it may take
few seconds for the device to update the content.
Please avoid inserting or ejecting SD card when other
operation is running as this may cause the system
hang.
 Do not remove the card if the content inside the
card is being played. This will halt the operation of
the device and cause the device to restart.
 If the system is not responding, press Power
button for 6 seconds to reset.
Chapter 1 Basics
card
device if
card
correctly.
To remove SD
card, push the
card once again
until it clicks.
When a SD card
4
and the
SD
is not
inserted