Main Power Switch; Selecting Floor Surface Setting - Filtropur Owner's Manual

Getting Started — continued

Main Power Switch

Turn on your Filtropur by pressing the toggle
switch to high [ HI ] speed position for carpets,
or normal speed (LO) for general cleaning and
light cleaning (curtains) with hose.

Selecting Floor Surface Setting

The Filtropur has a floor surface setting switch, which allows for appropriate
use of the different types of surfaces you choose to vacuum.
For cleaning carpets, turn the floor (roller brush) switch on (symbol — ) for
carpet.
For bare floors, such as hardwood, tile or linoleum, turn the roller brush
switch off (symbol O ) to disengage the roller brush.
The Filtropur Vacuum features an Auto-
Adjust setting that will determine the
level of carpet or surface you desire to
clean and automatically adjust the height
of the roller brushes for optimal
cleaning.
Filtropur also includes a low 3.5 inch-
clearance housing that enables you to
easily clean under furniture. Simply
lower handle unit to a low, in-use
position to clean areas from 1 to 2 feet
under beds, couches and tables.
6
MAIN POWER
SWITCH
FLOOR
SWITCH