Advertisement
3. Operating lever
Retractable :
To allow the wheelchair to get close to a table, it
is possible to dismantle the operating lever (C).
Remove it after releasing the indexable lever (I).
(photo 5a)
Adjustable :
Three positions provide the height-adjustment of
the lever. Unfasten screw (O), slide the lever to
the desired position and tightly fasten screw (O).
(photo 5b)
Photo 5a
4. Disengaging the steering mechanism
Going up a steep slope or over an obstacle requi-
res the assistance of an attendant.Therefore it is
sometimes necessary, for the attendant to move
the wheelchair, to disengage the operating rocker
beam from the fork in order to release the front
directional wheel.
Press the end of the disengaging spring (J) to
release the shaft (K). (photo 6)
O
Photo 6
Photo 5b
3
Advertisement
