Do you have a question about the EM-100II and is the answer not in the manual?
Questions and answers
Jim Riley
March 9, 2025
Can I use a Yamaha NS Series CA-600 power amp to get more volume from a Yamaha EM Series 100 II mixer? If so, how do I route the connections? (The CA-600 is a home stereo power amp)
1 comments:
Mr. Anderson
May 14, 2025
Yes, a Yamaha NS Series CA-600 power amp can be used to increase volume from a Yamaha EM-100II mixer.
Connection routing steps:
1. Use the Line Out jacks on the EM-100II mixer. 2. Connect the Line Out (unbalanced) to the input of the CA-600 power amp using appropriate cables (e.g., RCA or 1/4" TS to RCA, depending on the amp input). 3. Connect speakers to the speaker output terminals of the CA-600 power amp.
This setup uses the mixer to control audio signals and the power amp to boost volume for external speakers.
Need help?
Do you have a question about the EM-100II and is the answer not in the manual?
Questions and answers
Can I use a Yamaha NS Series CA-600 power amp to get more volume from a Yamaha EM Series 100 II mixer? If so, how do I route the connections? (The CA-600 is a home stereo power amp)
Yes, a Yamaha NS Series CA-600 power amp can be used to increase volume from a Yamaha EM-100II mixer.
Connection routing steps:
1. Use the Line Out jacks on the EM-100II mixer.
2. Connect the Line Out (unbalanced) to the input of the CA-600 power amp using appropriate cables (e.g., RCA or 1/4" TS to RCA, depending on the amp input).
3. Connect speakers to the speaker output terminals of the CA-600 power amp.
This setup uses the mixer to control audio signals and the power amp to boost volume for external speakers.
This answer is automatically generated