Download Print this page

Advertisement

Quick Links

VT-2000 Tripod
VT-2000 Tripod
User Manual
QR-2000
Quick-Release Plate for VT-2000 Tripod
Pearstone offers a spare or replacement quick-release
plate for the VT-2000 tripod head. Having a
quick-release plate attached to the camera's base at all
times allows you to attach or remove the camera from
the tripod without having to waste time fumbling with
the threaded mount. Your VT-2000 Tripod includes
one quick-release plate, but you may want to have
spares for other cameras. The Pearstone QR-2000 has
a 1/4˝-20 mounting stud and a retractable register pin
for correct camera positioning. The anti-skid
mounting surface stabilizes the camera.
VT-2500B
2-Way Pan Head Tripod
Pearstone also offers the VT-2500B tripod. This
lightweight video tripod system features a two-way
fluid
head
and
a
passive
quick-release mounting plate. A 50mm leveling ball
and a built-in spirit level allow for rapid setups.
There are separate pan and tilt locks. Non-slip flip
locks on the legs are quick and easy to use and
clamp efficiently. The legs end in ground spikes for
outdoor use with retractable rubber feet for delicate
floor surfaces. The mid-level spreader stabilizes the
tripod on uneven surfaces and folds into the legs for
transport. Sturdy, anodized aluminum construction
travels easily at seven lb in its carry bag, yet will
support cameras up to 15 lb.
Limited One-Year Warranty
Pearstone provides a limited warranty that this
product is free from defects in materials and
workmanship to the original purchaser under
normal use for a period of one (1) year from the
original purchase date. Pearstone's responsibility
with respect to this limited warranty shall be
limited solely to repair or replacement, at its
option, of any product which fails during normal
consumer use. This warranty does not extend to
damage or failure which results from misuse,
neglect, accident, alteration, abuse, improper
installation
PROVIDED
NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY
PARTICULAR PURPOSE. To obtain a replacement
counterbalance
during the time of this warranty please return the
defective item with proof of purchase along with
an RMA number to the place of purchase. This
warranty gives you specific legal rights, and you
may also have other rights which vary from state
to state.
© Copyright 2010 Pearstone
www.pearstone.com
or
maintenance.
EXCEPT
AS
HEREIN,
PEARSTONE
MAKES
OR
FITNESS
FOR
A

Advertisement

loading
Need help?

Need help?

Do you have a question about the VT-2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pearstone VT-2000

  • Page 1 Pearstone offers a spare or replacement quick-release workmanship to the original purchaser under plate for the VT-2000 tripod head. Having a normal use for a period of one (1) year from the quick-release plate attached to the camera’s base at all original purchase date.
  • Page 2 Setting Up Your Tripod Step 1: Assess Shooting Area Step 2: Extend Legs Step 3: Spread the Tripod To set up your tripod, begin by removing the tripod Always extend the legs from the top flip-locks first. Pull Plant the front leg of the tripod. Lift the back two legs from the box and/or carry case.
  • Page 3 Setting Up Your Tripod tilt lock pan lock Step 10: Start Shooting Step 11: Pan Step 12: Tilt If you do not need to pan or tilt during your shot, keep Release the pan lock knob. Using the pan/tilt bar, move Release the tilt lock knob.
  • Page 4 • Never set up or pull down a tripod Pearstone VT-2000 Tripod. • Gear-driven center column while a camera is mounted All Pearstone tripods are designed with friction control • Do not move the tripod or adjust the legs to balance features professionals •...