Mohu JOLT Instruction Manual

INSTRUCTION MANUAL
®
JOLT HDTV Antenna Amplifier
HDTV ANTENNA
Attach the coaxial cable from the
antenna to the Jolt Amplifier.
No tools required.
Attach the short cable on the Jolt
amplifier into the ANT/IN connector
on the back of your TV.
The Jolt amplifier must be powered
in order to function. Plug the small
end of the included USB cable into
the amplifier and the large end of the
USB cable into an open USB port on
the back of your TV. If your TV does
not have a USB port, use the included
wall adapter to power the amplifier
via any standard 120V wall outlet.
ANT/IN
In your TV's setup menu, set the tuner mode to "Antenna" or "Air".
Consult your TV manual for detailed instructions.
In your TV's setup menu, set TV to "scan" for channels. This can
sometimes be listed as auto-program, auto-scan, channel search or
channel scan. Consult your TV manual for detailed instructions.
TUNER MODE
ANTENNA
THE JOLT AMPLIFIER
BACK OF HDTV
www.gomohu.com
CHANNEL SEARCH
SCANNING FOR CHANNELS
WHAT'S IN THE BOX?
POWER ADAPTER 3FT USB CABLE
GOT QUESTIONS? WE'VE GOT ANSWERS.
Contact our friendly Customer Support
for a more in-depth reading of the stations
available in your area.
CALL:
1-855-4-GOMOHU [M-F 8a-5p EST]
E-MAIL:
support@gomohu.com