Viewing An External Signal Source (Depending On The Model); N U T (Depending On The Model) - Samsung CS29M6 Owner's Instructions Manual

ENG
TV
Source List
Edit Name
Move Enter
TV
TV
AV1
AV2
S-Video
Component
Move Enter
TV
Source List
Edit Name
Move Enter
TV
AV1
AV2
S-Video
Component
Move Enter
TV
AV1
AV2
S-Video
Component
Move Enter
Viewing an External Signal Source
Input
√ √
√ √
Return
Source List
----
----
----
----
Return
Input
√ √
√ √
Return
Edit Name
√ √
: ----
√ √
: ----
√ √
: ----
√ √
: ----
Return
Edit Name
----
√ √
: ----
VCR
√ √
: ----
DVD
Cable STB √ √
: ----
Sat. STB
√ √
: ----
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Return
36
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1
Press the MENU (
Result: The main menu is displayed.
2
Press the ENTER (
Result: The options available in the Input group are
displayed.
3
Press the ENTER (
Result: The options available in the Source List group are
displayed.
Press the M or L button to select signal source, then press the
4
ENTER ( ) button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks : AV1, AV2, S-Video or
Component on the TV's rear panel, and AV2 or S-Video on
the TV's side (or front) panel.
➢
S-Video and Component signal sources are depending on
the model.
5
Press the MENU (
Result: The main menu is displayed.
6
Press the ENTER (
Result: The options available in the Input group are
displayed.
Press the M or L button to select Edit Name . Press the ENTER
7
( ) button.
Result: The options available in the Edit Name group are
displayed.
Press the M or L button to select external device :
8
AV1 - AV2 - S-Video - Component.
9
Press the ENTER (
Result: The device names available are listed.
Select the name by pressing the † or ... button.
10
Press the ENTER (
11
Set other signal sources (AV1, AV2, S-Video, Component) using
the same method as listed above.
➢
You can also set these options simply by pressing the VIDEO
( ) button. If you change the external source while
viewing, pictures might take a short period of time to be
switched.
(depending on the model)
) button.
) button to select Input.
) button again to select Source List.
) button.
) button to select Input.
) button.
) button.