Digi-Frame DF-390 Quick Reference

DF-390
Quick
Reference
Make sure that the Digi-Frame
is turned off.
Insert your Memory card with
JPEG format digital pictures.
The DF-390 accepts both
SmartMedia & CompactFlash
memory cards. Insert them as
shown.
Turn your Digi-Frame on.
The Slideshow will begin
automatically.
Customize and save your
slideshows using the Menu
System.
Enjoy your Digital Pictures!
Brand name
toward the
back of the
Digi-Frame
Gold
contacts
toward the
back of the
Digi-Frame.
or
WARNINGS!
!
Do Not Block the Ventilation Holes on the back
of the Digi-Frame™ at any time.
WARNING! USE ONLY RECHARGEABLE NiMH
BATTERIES. USE OF ANY OTHER TYPE OF
BATTERY MAY CAUSE EXPLOSION, FIRE, OR
PERSONAL INJURY. DIGI-FRAME INC. IS NOT
LIABLE FOR LOSS OR DAMAGES RESULTING FROM
USE OF NON-RECOMMENDED BATTERIES.
Keep your Digi-Frame™ out of direct sunlight.
Direct sunlight may cause damage.
Always use the eject buttons on the memory
storage card slots to remove the memory storage
cards.
Do not open the case of the Digi-Frame™. There
is risk of electric shock, and there are no user
serviceable parts inside. Opening the case will
void your warranty.
Do not use Digi-Frame™ if conditions could allow
condensation to occur, or damage may result.
The screen on the Digi-Frame™ is made of glass
and can break. It is covered with plastic
polarizing material that can be scratched. Treat
it gently, and follow the screen care instructions
in the User Manual.
The Menu Wheel:
Click the Menu Wheel at any time during
the slideshow to enter the control menu.
From this menu you can customize
slideshows, and take advantage of the
many features of the Digi-Frame.
While in the menu pressing;will exit
the Menu.
The Manual Control Buttons:
Forward:
Press the 4 button to advance to the
next picture.
Play/Pause:
Press the ; button to pause the
slideshow.
If the show is paused press the ;to
resume the slideshow.
Back:
Press the 3 button to go back to the
previous picture.
The Contrast Wheel:
With the Digi-Frame in operation,
rotate the contrast wheel to create the
optimum display setting.
!