Setup Diagnostics - Abocom Modem UTM560 Quick Installation Manual

Setup Diagnostics

1. To verify if the USB V.90 Tiny Modem is well
installed and enabled, you can perform the
following steps.
2. Go to
Start Settings Control Panel Modems.
3. When the Modems Properties dialog box
appears, select the Diagnostics tab.
4. Highlight USB V.90 TINY MODEM and click
the More Info... button.
5. If the following information can be found, it
means that the USB modem is well installed and
enabled. Click OK to exit.
- 13 -