Appendix B; Daily Maintenance Task Chart - Diamond Power Products CC7074 Operator's Manual

Appendix B

Daily Maintenance Task Chart

Inspect the saw for damages
1.
and repair.
Tighten loose nuts, screws, and
2.
bolts.
Check all fluid levels (fuel,
engine oil, hydraulic fluid,
3. radiator fluid, upper and lower
gearbox oil) and fill as
necessary.
Wipe down and clean all saw
components to remove dust,
4.
debris, and slurry (especially
from fans).
Inspect all belts for tension and
5. wear. Replace or tension as
necessary.
Clean the air cleaner (see
6.
engine manual).
Check and clean the water filter
7.
strainer.
Clean the radiator and wipe
8.
down the cooling fan.
9. Drain the heat sink.
Look for fluid leaks and check
10. all hoses. Repair all damaged
components.
11. Refer to the engine manual and manufacturer for daily engine care and routine maintenance tasks.
Table 3: Daily Maintenance Task Chart
Date
  
36
   