Summary of Contents for American Fibertek MX2-MM-FX-SC
-
Page 1: Media Converter
Instruction Manual MX2-MM-FX-SC MXR2-MM-FX-SC MX2-SM-FX-SC MXR2-SM-FX-SC Media Converter © Copyright 2008, American Fibertek, Inc. 0909JD... - Page 2 Table of Contents Functional Description ................…3 Installation ....................3 MX2 Power Source..................4 MX2 Power Connection ................4 MX2 Fiber Data Connections............... 4 MX2 Copper Data Connections ..............4 MXR2 Power Source ................... 5 MXR2 Power Connection ................5 MXR2 Fiber Data Connections ..............5 MXR2 Copper Data Connections ..............
- Page 3 Ethernet output using a 1300 nm wavelength detector. The MX2-MM-FX-SC and MXR2-MM-FX-SC units operate on 50 um or 62.5 um multimode fiber with a maximum distance of 2 Km. The MX2-SM-FX-SC and MXR2-SM-FX-SC units operate on 9 um singlemode fiber with a maximum distance of 20 Km.
- Page 4 Media Converter MX2-MM-FX-SC 10/100BASE-TX To 100BASE-FX MX2 Series MX2 SERIES POWER SOURCE THIS PRODUCT SHALL BE POWERED BY A LISTED CLASS 2 POWER SUPPLY ONLY. MX2 series units require a +5VDC power source for proper operation. The DC input is diode protected.
- Page 5 FIBER american fibertek 1 FX LINK Media Converter MXR2-MM-FX-SC 10/100BASE-TX To 100BASE-FX 2 PWR MXR2 Series MXR2 SERIES POWER SOURCE Power to MXR2 series units is supplied by the subrack. Please refer to the MXRC-1 and MXRCPS-1 instructions for further details.
- Page 6 MX2 / MXR2 STATUS INDICATORS The MX2 / MXR2 series units provide the following LED status indicators to aid in troubleshooting: A green LED indicator monitors the presence of DC power into the unit. Power status associated with this LED is summarized below. PWR Indicator: Power Status: Green...
- Page 7 WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery and for a period of five years thereafter the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return.
Need help?
Do you have a question about the MX2-MM-FX-SC and is the answer not in the manual?
Questions and answers