Do you have a question about the SCSI and is the answer not in the manual?
Questions and answers
Summary of Contents for Digital Equipment SCSI
Page 1
SCSI Expander Owner's Manual Part Number: EK-SCSIE-OG. A01 August 1995 Digital Equipment Corporation Maynard, Massachusetts...
Page 2
August 1995 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description.
SBBs, and CD-ROM drives. Product Description The BA362 is a two device modular desktop 8/16 BIT Storage SCSI expansion box. This enclosure will allow a maximum of two 3.5-inch SBBs to be installed. The physical dimensions of the enclosure are 7.0 inches (177.8 millimeters) wide by 12.67 inches (321.8 millimeters) long by 10.5 inches (266.7 millimeters) high.
Page 4
BA362 + 2xRZ29B BA362 + 2xRZ26N BA364 diskless BA364 + 2xRZ29B BA364 + 4xRZ29B BA364 + 2xRZ26N BA364 + 4xRZ26N [Aktuelle Werte für spezielle Ausrüstungsstufen sind über die Digital Equipment Vertretungen erhältlich. 1 B = 10 dBA.] 2 SCSI Expander Owner’s Manual...
Page 5
(BA36X-AA) when installed on the desktop. This kit contains the following items: • C13/C14 SPT-2 power cord (17-04216-01/BC25Y-1G) • One (1) 6-inch long SCSI-P cable assembly (17-04222-01/BC25Z-0F) • Interlock cover (74-50239-01) • Five (5) #10 PAN 0.375-inch screws (90-00062-38) •...
Page 6
BA364-AA/AB System with Stack Kit Contents Stack Kit (BA36X-AA) 4 SCSI Expander Owner’s Manual...
Page 7
BA362-AA/AB System with Stack Kit Contents Stack Kit (BA36X-AA) SCSI Expander Owner’s Manual 5...
Page 8
Removing the Rear Bezel Installing the External SCSI Cable (from Host System) 6 SCSI Expander Owner’s Manual...
Page 10
Unlocking Front Door Locked Position Power Switch Location Note: When powering up system, drive activity lights will illuminate. 8 SCSI Expander Owner’s Manual...
Page 11
NOTE: BA362 slot designators: The bottom slot is Slot 1 (S1) and the top slot is Slot 2 (S2). NOTE: Refer to page 21 for BA364 Drive DIP Switch Settings. Refer to page 22 for BA362 Drive DIP Switch Settings. SCSI Expander Owner’s Manual 9...
Page 13
Installing CD ROM Drive SCSI Expander Owner’s Manual 11...
Page 14
Note: Ferrite bead shall be installed onto headphones for the CDROM near the jack connector. Note: Remove two existing 6-32 screws from internal top cover and install (2) 6-32 1/4" length screws when installing RRD45-AA in the top slot of the enclosure. 12 SCSI Expander Owner’s Manual...
Page 15
Installing CD ROM Drive (Continued) SCSI Expander Owner’s Manual 13...
Page 16
Stacking Units Preparing Top Expansion Box Top Expansion Box 14 SCSI Expander Owner’s Manual...
Page 21
Installing External SCSI Cable Note: User should set SCSI ID settings so that the top enclosure SCSI ID settings do not conflict with the bottom enclosure. SCSI Expander Owner’s Manual 19...
Need help?
Do you have a question about the SCSI and is the answer not in the manual?
Questions and answers